Hi Eric,
Try something along these lines....
hub4com --baud=38400 --octs=off --stop=2 --no-default-fc-route=All:All
--route=All:All --create-filter=pinmap:"--rts=!connect --dtr=!connect"
--add-filters=0:pinmap COM1 \\.\CNCB0 \\.\CNCB1
Not well-tested, but might get you a bit further along...
73,
~iain / N6ML
On Mon, Jul 16, 2012 at 11:06 AM, Eric Van der Velde
<ericvanderve...@hotmail.com> wrote:
> Iain,
>
> I tried the GPS HUB example
> (http://com0com.cvs.sourceforge.net/viewvc/com0com/hub4com/ReadMe.txt) from
> hub4com (2 com0com pairs and hub4com).
>
> As soon as I started the hub4com the TRX started sending (PTT + KEY). No QRG
> info and the keydown situation didn't stop until I killed the hub4com
> process.
>
> Running CWSkimmer degrades the N1MM performance of my PC. Running CWSkimmer
> on a separate PC could solve this issue.
>
> Thanks,
>
> Eric PE3V
>
>> Date: Mon, 16 Jul 2012 10:54:10 -0700
>
>> Subject: Re: [Elecraft] com0com N1MM and CWSkimmer
>> From: a...@dseven.org
>> To: ericvanderve...@hotmail.com
>> CC: elecraft@mailman.qth.net
>
>>
>> On Mon, Jul 16, 2012 at 8:38 AM, PE3V <ericvanderve...@hotmail.com> wrote:
>> > I am trying to setup a serial connection between an Elecraft K3,
>> > CWSkimmer
>> > and
>> > N1MM using com0com/hub4com.
>> >
>> > I don't get it working. Anyone on this forum who got this working
>> > properly?
>> >
>> > Thanks Eric PE3V (ex PA3FKN)
>> >
>> > PS I tried LP Bridge and that's working fine, but com0com looks a little
>> > bit
>> > more ligthweigth .... (and if I can get it working I also have the
>> > possibility
>> > to run the serial ports over ethernet)
>>
>> I'm not sure it's really any "lighter" than LP-Bridge... it's just
>> different. You'd have to create two com0com pairs (one for N1MM Logger
>> and one for CW Skimmer), then configure hub4com to connect the other
>> ends of those two pairs, and the "real" K3 COM port together. I played
>> with hub4com a bit some time ago, but don't recall if I ever tried
>> this combination. How far did you get with it?
>>
>> BTW, the big difference between this and LP-Bridge is that there's a
>> possibility for multiple applications to issue commands to the K3 at
>> the same time, with unexpected results. LP-Bridge has lots of "special
>> intelligence" to handle this, where hub4com has no idea about the
>> meaning of messages it's passing back and forth....
>>
>> 73,
>>
>> ~iain / N6ML
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
