PE3V wrote > > I also use a serial port (COM1) for communication between te K3 and my > computer. The thing is that I have N1MM and CWSkimmer running at the same > time. They both need information from the K3 (like current frequency). > I need some splitter which sends the QRG to both N1MM and CWSkimmer. > thanks, > Eric PE3V >
I haven't been following this thread completely but I've been running Skimmer and N1MM simultaneously via LP-Bridge for several years with no problems. Below is an example of them working together with an AutoHotKey script which allows me to jump the K3 up or down to adjacent Skimmer decoder dots with a mouse wheel. A key aspect of this is that focus is always returned to N1MM after frequency jumps. http://www.youtube.com/watch?v=N6bq_kpHdEU http://www.youtube.com/watch?v=uZDXuOgUQJ0 (SAC contest example) My old Pentium IV (2.8 GHz) XP CPU and Audiophile 2496 typically run at about 20-30% CPU utilization and I've had no problems with both N1MM and Skimmer getting frequency information, as you can see in the videos. 73, Bill W4ZV -- View this message in context: http://elecraft.365791.n2.nabble.com/com0com-N1MM-and-CWSkimmer-tp7559213p7559242.html Sent from the Elecraft mailing list archive at Nabble.com. ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html