What the book says means that the SubRX is now controlled by VFO A. VFO B is used for split TX. It does not mean that the readout on VFO B changes to whatever is on VFO A. 73, Guy.
On Sun, Jul 29, 2012 at 6:17 PM, Jim Bennett <w6...@mac.com> wrote: > Hi - > > > I just finished installing the sub receiver in my K3 # 4359. Set up the > filters, sub synth, etc.The subrx book sez (page 44), that if you press & > hold the SUB for 2 seconds or more it will go into Diversity mode. That it > does. It also sez that the kHz dot on VFO A will flash, to indicate > Diversity mode. That it does. But it also sez on page 45 that when this is > done, it sets the sub to the same frequency as the main (VFO A). It does > NOT - frequency in VFO B stays right where it was. I did find a way to make > it work, but I'm wondering if the book is wrong, if I'm not reading it > correctly, or if there is a screw-up in the firmware. I did download the > most recent non-beta f/w into the K3. > > > > On my K3 I have to first do the A>B twice to get both VFO's on the same > freq, with the same settings, then go into Diversity mode, and finally > press the SUB button again for less than 2 seconds to make it "Link". This > keeps it in Diversity mode and "Links" the two VFO's on the same frequency. > If it worked as the book sez on page 45, it'd be a lot easier. Any > suggestions? > > Jim / W6JHB > > > ______________________________________________________________ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:Elecraft@mailman.qth.net > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
