Today, I was copying KSM on 6474 KHz on one VFO and decided to send K6KPH a signal report on 7050 KHz on the other. I had set my P3 to 20 KHz span, and the left edge was 7040 KHz [I'm in fixed-tune mode, the VFO cursor moves, I was "two spans up" from the bottom of the band] and the VFO A cursor was in the middle of the display when I was on 7050.
I tapped A/B, now listening to KSM on 6474. The P3 showed a 20 KHz span from 6460 to 6480 and the signal at 6474. I got a QSA and QRK, and then tapped A/B again to swap VFO's. At this point, the left edge of the P3 display was my transmit frequency [7050] instead of 7040 where I had set it previously. It seems to be totally repeatable. Is this normal behavior? I guess I expected the P3 to return to the configuration I had set on the 40m VFO ... 7040-7060 with the tx freq in the middle. 73, Fred K6DGW - Northern California Contest Club - CU in the 2012 Cal QSO Party 6-7 Oct 2012 - www.cqp.org ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
