Get a roll of 3M super strength moulding tape at your local auto parts or farm store. Comes in a red package. Two different widths. It's a grey double sided sticky tape and leaves no residue if you remove it. It's intended for sticking mouldings onto the sides of cars. I cut a little square of about 3/8 ths inch and put under at least the two front feet on the K line stuff to keep everything from moving. It's good for sticking an outlet strip to the desk, etc. Won't hurt the paint and can be removed by rolling it off with your finger. Do not use too much like a whole strip of it, because it'll take a large force to break a large strip loose from say sticking an outlet strip to a formica desk. A little dot here and there does it.
Chuck, KE9UW aka Jack, BMW Motorcycles BMWMOA #224 ________________________________________ From: elecraft-boun...@mailman.qth.net [elecraft-boun...@mailman.qth.net] on behalf of Fred Jensen [k6...@foothill.net] Sent: Sunday, August 26, 2012 9:55 PM To: elecraft@mailman.qth.net Subject: Re: [Elecraft] [K3] Problem w/front panel switches Well Phil's problem isn't mine, and I'm not even sure I have a problem, but my K3 switches are a bit erratic. They don't do things other than what they should do, they just don't always do it reliably. Going to TX TEST, I'll often get a mode switch as if I tapped it instead. Others are sort of the same. I have a hard time keeping the radio stable on the shelf, it really isn't all that good for protection against gravity outages [like an SX-28 was :-)], and it does move. I think I need to figure out how to get it really stable first. Then we'll see. 73, Fred K6DGW - Northern California Contest Club - CU in the 2012 Cal QSO Party 6-7 Oct 2012 - www.cqp.org On 8/26/2012 9:39 AM, David Pratt wrote: > Phil - Have you tried re-installing the Front Panel firmware? Just a > thought. > > 73 de David G4DMP > > In a recent message, Phil & Debbie Salas <dpsa...@tx.rr.com> writes >> BTW - I can switch bands using the buttons on my KPA500, and it transmits >> fine. Just front panel button problems. ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
