Tom, The K3 keeps separate input selections and input gain by mode ...
Make sure the K3 is in DATA A, and while in that mode make sure Line In is selected and check the input level (mic gain). The menu "Line Level" is receive - not transmit. Also make sure you have selected "Line Input (rear)" for FSK/DIGITAL in Router's audio switching tab and confirm that you have selected "Headset Earphone (microHAM CODEC)" as the "Sound Output Device" on the "Station Setup" tab in the JT65-HF configuration dialog (assuming you are using JT65-HF and not WSJT). If you can run PSK31/63 and MFSK with MMVARI there should be no difference in running JT65-HF. 73, ... Joe, W4TV On 9/10/2012 5:46 PM, cx...@4email.net wrote: > Joe and Matt, > > Tnx for the input.. > > Check the Main menu and "Line In" was set...changed to rPL and still no > xmit...keys but nothing comes out...went back to "Line IN" and tried > changing the Line Level from 10 to 30 to 100; still nothing comes out, > although it does key....this is noted by 'SC' "Line" and PTT2 LEDs lite > when rig keys... > > K3 works perfectly with Logger 32 and MMTTY and MMVari for RTTY and PSK. > > Checked the settings on mH mK II and the key from rear is selected and > "Sound card PTT" is unchecked, just like the mK II set up guide directs... > > What else do you recommend that I look for? > > 73 > Tom > CX7TT > ______________________________________________________________ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:Elecraft@mailman.qth.net > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html