On Mon, Oct 1, 2012 at 12:09 PM, Joe K2UF <j...@k2uf.com> wrote: > 1.- I had to reset the mode from FSK D to AFSK A many times. Usually when > I changed bands or a large change in frequency within the same band. When I > get to the top of the band and want to go back to the bottom of the band I > would type the frequency in N1MM. Radio would QSY to the new frequency but > the mode would revert back to FSK D. This would not happen every time but > quite often.
In N1MM Logger, "Config" -> "Configure Ports..." -> "Digital Modes" (tab) Check that "DI-1 MMTTY Setup" -> "MMTTY Mode" is set to "AFSK". and on the "Mode Control" tab, set the "Mode sent to radio" for "RTTY" to "AFSK". 73, ~iain / N6ML ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html