Cecil, That is great news. Enjoy the rest of the build.
73, Don W3FPR On 10/26/2012 3:57 PM, Cecil Turquette wrote: > Don - Appears problem solved. Pin 4 of the encoder measured "open" to > ground. I messed around for an hour trying to figure out why. I finally > found the wire from the circuit board to the encoder termal #4 broken. I > used trimmed component leads to make the four connections as called out in > the book. Apparently the one on #4 had a nick in it; flexing of the wire > during assembly of the front panel caused it to break. The break was well > hidden. I replaced the wire and encoder functions properly. Ready to move > on! Thanks for your help, 73, Cecil > ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html