Dear Joe, 

I've tried both jumpers position and nothing!!!
With my kenwood hand mic everything is ok. But with the MH-2 mic (even changing 
the jumper position) nothing!!

Best Regards
Em 23/02/2013, às 23:31, Joe Subich, W4TV escreveu:

> 
> The MH2 is an electret mic wired with a Foster plug having Elecraft's
> Kenwood compatible pin assignments.  The microHAM DB37-EL-K3R and
> DB37-EL-K23 cable sets are configured for the Electaft/Kenwood standard
> and the supplied Foster to RJ-45 adapter cable allows connecting the
> MH2 to the rear panel MIC jack (RJ45).
> 
> Since the MH-2 is an electret mic and requires bias voltage on pin 1,
> it is necessary to install the "electret" jumper for the RJ-45 jack
> located just in front of the three trimmers in the center of the MK II
> circuit board as shown in step 5 of "Preparing microKEYER II for Use" -
> page 8 of the microKEYER II User Manual.
> 
> 73,
> 
>   ... Joe Subich, W4TV
>       microHAM America, LLC.
>       http://www.microHAM-USA.com
>       http://groups.yahoo.com/group/microHAM
> 
> 
> On 2/23/2013 7:25 PM, Ricardo PY2PT wrote:
>> Dear guys,
>> 
>> 
>> Please, any friend use the hand mic (MH-2) with a MicrokeyerII interface?
>> 
>> 
>> Best Regards
>> 
>> 
>> 
>> Ric
>> PY2PT
>> ______________________________________________________________
>> Elecraft mailing list
>> Home: http://mailman.qth.net/mailman/listinfo/elecraft
>> Help: http://mailman.qth.net/mmfaq.htm
>> Post: mailto:Elecraft@mailman.qth.net
>> 
>> This list hosted by: http://www.qsl.net
>> Please help support this email list: http://www.qsl.net/donate.html
>> 
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft@mailman.qth.net
> 
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

Reply via email to