Kenwood mic does not use bias (it is dynamic).  Elecraft requires
bias.  Measure between pins 1 and 7 to confirm bias (2.2 to 3.3V -
industry standard for AV mics).

Also check to make sure the microphone is wired correctly - mic
ground must be on pin 7, PTT ground must be on pin 8.  If the two
are reversed the mic will not receive bias.  Elecraft connects
both 7 and 8 to the same ground but the mic and PTT grounds are
different in microKEYER/microKEYER II (and most other manufacturers).

73,

   ... Joe, W4TV


On 2/24/2013 1:05 AM, Ricardo PY2PT wrote:
Dear Joe,

I've tried both jumpers position and nothing!!!
With my kenwood hand mic everything is ok. But with the MH-2 mic (even changing 
the jumper position) nothing!!

Best Regards
Em 23/02/2013, às 23:31, Joe Subich, W4TV escreveu:


The MH2 is an electret mic wired with a Foster plug having Elecraft's
Kenwood compatible pin assignments.  The microHAM DB37-EL-K3R and
DB37-EL-K23 cable sets are configured for the Electaft/Kenwood standard
and the supplied Foster to RJ-45 adapter cable allows connecting the
MH2 to the rear panel MIC jack (RJ45).

Since the MH-2 is an electret mic and requires bias voltage on pin 1,
it is necessary to install the "electret" jumper for the RJ-45 jack
located just in front of the three trimmers in the center of the MK II
circuit board as shown in step 5 of "Preparing microKEYER II for Use" -
page 8 of the microKEYER II User Manual.

73,

   ... Joe Subich, W4TV
       microHAM America, LLC.
       http://www.microHAM-USA.com
       http://groups.yahoo.com/group/microHAM


On 2/23/2013 7:25 PM, Ricardo PY2PT wrote:
Dear guys,


Please, any friend use the hand mic (MH-2) with a MicrokeyerII interface?


Best Regards



Ric
PY2PT
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html


______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

Reply via email to