Mike, Unless you are dead set on doing that in a hardware interface, try Ham Radio Deluxe or the N4PY software - what you want to achieve is already programmed into them (or can be customized for that function).
If you wish to create a hardware interface, I might suggest that the easiest path is to have the new hardware buttons buttons interface with a microprocessor that in turn sends the appropriate commands ot the K2 through the KIO2. To do a direct hardware implementation without the processor, one would have to provide a lot of connections and signals to the K2 microprocessor, and that would take more circuits that it is worth in my opinion. 73, Don W3FPR > -----Original Message----- > > I'm in the process of designing an interface for my K2 that would > bring functions, currently enabled or changed by tapping keys or > holding keys, to independent controls. I am also going to bring > some functions, that are enabled by navigating through the menu > system, to single button/switch functions. I am doing all of > this to bring a big radio feel to my small and capable K2. > > I would like to find out which functions you would like to see > implemented with a single control. As an example, instead of > tapping the mode button to select USB, LSB, or CW, I will just > turn the rotary switch to the desired mode. > > Thanks for your input. > > Mike, WA1SEO > K2-4778 > -- No virus found in this outgoing message. Checked by AVG Anti-Virus. Version: 7.0.344 / Virus Database: 267.11.13/126 - Release Date: 10/9/2005 _______________________________________________ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
