On 13-07-10 10:42 PM, Don Wilhelm wrote:
There is one possibility that your 51 ohm load (measured at DC) is not a good 51 ohm pure resistance at the frequency you were measuring. Borrow an antenna analyzer and test your load at the frequency of operation.
I seem to have thrown people off by including the mention of tuning the KAT2 with a dummy load attached as it is not relevant to the problem. I stated that I set the K2 to calS mode which is supposed to put the KAT2 in to bypass mode according to the manual. The only effect the KAT2 should have on the incoming signal should be minimal based on stray L/C. The 10 fold drop in signal just doesn't seem right to me.
-- Cheers! Kevin. http://www.ve3syb.ca/ |"Nerds make the shiny things that distract Owner of Elecraft K2 #2172 | the mouth-breathers, and that's why we're | powerful!" #include <disclaimer/favourite> | --Chris Hardwick ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
