You mean you don’t already have these?
Bill
K9YEQ

-----Original Message-----
From: elecraft-boun...@mailman.qth.net 
[mailto:elecraft-boun...@mailman.qth.net] On Behalf Of Don Wilhelm
Sent: Thursday, August 22, 2013 4:38 PM
To: elecraft@mailman.qth.net
Subject: Re: [Elecraft] K3 and whats next from Elecraft - my 2 cents

If this trend continues, not only will we need aluminum foil hats, but our 
computer display screens will need an aluminum foil covering as
well.:-)

73,
Don W3FPR

On 8/22/2013 5:25 PM, Lee Buller wrote:
>
> The K3 is a fine radio and not much could be added to such a fine 
> piece of work.
>
>
> But, doing research on the internet I found that if you could degauss 
> the ion slip stream, ratchet up the electronobulator, and then put in 
> some plasticized radionic grease on the shafts …Elecraft could 
> increase the affection factor by 1278.3410.  Now…we’re talking.
>
> Of course, you would have to add a situational magna-inducer to the 
> final stage that would increase the efficiency to 178.6 percent while 
> reducing the total joules per second to a minimal and safe level.  
> This would make the FCC very happy because the Frozone Zone would be 
> infinitesimally small thus saving millions of lives.
>
> Coupled with the new radically opposed singularity, the K3 could take 
> an operator to the far reaches of propagation with resounding
> clarity and brightness.   Work could be done to super-charge the
> eletronobulator to increase the density of the induction Hickcock 
> field coils which would give you enormous amounts of gain both 
> transmit and receive throughout the spectrum, here and on worlds not yet 
> discovered.
>
> Now we know that the flux-capacity is old hat and should not even be 
> considered, but the new cranial cold fusion super flux capacitor would 
> fit well into the box and provide output that we’ve never seen as 
> amateur radio operators.  Then, there is the possibility that you 
> could run two cranial cold fusion super flux capacitors in parallel 
> without marginalizing the receiver but keeping the QSO rate well above 
> 1,000 per hour.
>
> I will continue to research new developments on the Internet to see 
> what new features could be incorporated in the K3 in the far distance 
> future.
>

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

Reply via email to