Are you in DATA A mode, or if not do you have compression turned up too far?
73 -KD0TSX On Saturday, January 4, 2014, Ron W3ZV wrote: > I am trying to operate AFSK on 15m in the ARRL RU contest. I have 2 > contacts in the last 2 hours. I am by no means a big gun, but I am usually > better than this. Lineup is K3-KPA500-KAT-500. No problems on receive. > Drive is set to produce about 350 watts from the KPA-500. SWR is below 1.5. > As far as I can tell, baud rate, and shift are okay. I don’t think I am > reversed. I know my signal is getting out, because I get a lot of AGN AGN. > What disturbs me is that my ALC indication is rapidly jumping between 2 to > 5 bars. This is not the 4 solid and 5 flickering. Power out on the KPA500 > jumps between 300 and 400 watts. If anyone has a suggestion to get me back > in the fray, I would be most grateful. > > Ron W3ZV > > > > > ______________________________________________________________ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:Elecraft@mailman.qth.net <javascript:;> > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
