Dick,
If you have an early K3 *and* you plugged a mono connector into the rear
speaker jack, one channel was shorted by the mono connector. That will
cause failure of the audio amp for the speaker.
Later K3s (I don't know the serial number) have protection for that
shorting condition. The best protection is not to put a mono plug into
the speaker jack. If you want mono, cut off the mono plug and connect
only the tip and shell to your speaker - the ring does not connect to
anything.
73,
Don W3FPR
On 1/14/2014 6:55 PM, Richard Solomon wrote:
Can someone explain to me exactly why the chip failed, and what the Audio
Protection Assembly is for ?
Tnx, Dick, W1KSZ
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html