I was working stations on and off today.
Came back into the shack this evening and tried to work a VK on 15m and
I had no output power.
I turned the power dial and it was at 0 watts, no problem just turn it
up. Normally I would progress a 1/10 of a watt at a time up to 12 watts
then it would increase at 1 watt intervals. This time it started at 0
and incremented at 1 watt intervals immediately, strange.
After setting the output to 100 watts and then depressing the transmit
button for a second it would transmit at 0 watts as displayed in the vfo
b and vfo A would display --.
I've disconnected the external devices to the acc connection (microham
mkII in this case along with a KAT500) as well as the rs-232 connection
to be sure an outside source was not controlling the rig.
I have the KPA3 installed and the rig has been back to Elecraft to have
the gold pins installed.
Any ideas?
Thanks
Rich - N5ZC
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html