I've read the the KPA3 install manual and I see what your talking
about. I don't have the jumpers, I'll get with elecraft in the morning
to see how to handle that.
Rich - N5ZC
On 1/26/2014 8:34 AM, Cady, Fred wrote:
Did you put the jumper back in?
73,
Fred KE7X
-----Original Message-----
From: elecraft-boun...@mailman.qth.net
[mailto:elecraft-boun...@mailman.qth.net] On Behalf Of Oliver Dröse
Sent: Sunday, January 26, 2014 7:25 AM
To: elecraft@mailman.qth.net
Subject: Re: [Elecraft] Fwd: K3 - No Power Out
Have you tried restoring your config file, Rich?
73, Olli - DH8BQA
Am 26.01.2014 15:15, schrieb Richard Thorne:
An update to my problem.
I've pulled the KPA3 100 watt module (and turned it off in the
configuration menu) hoping I would have a qrp rig when I was done,
unfortunately I don't.
I can adjust the power (while Not transmitting) and set it to say 12w.
As soon as I transmit the rig display's 0 watts
It appears that I may have a problem that requires the K3 to take a
trip to California. I'll call Elecraft tomorrow.
Rich - N5ZC
-------- Original Message --------
Subject: [Elecraft] K3 - No Power Out
Date: Sat, 25 Jan 2014 20:26:33 -0600
From: Richard Thorne <rtho...@rthorne.net>
To: Elecraft Reflector <elecraft@mailman.qth.net>
I was working stations on and off today.
Came back into the shack this evening and tried to work a VK on 15m
and I had no output power.
I turned the power dial and it was at 0 watts, no problem just turn it
up. Normally I would progress a 1/10 of a watt at a time up to 12
watts then it would increase at 1 watt intervals. This time it
started at 0 and incremented at 1 watt intervals immediately, strange.
After setting the output to 100 watts and then depressing the transmit
button for a second it would transmit at 0 watts as displayed in the
vfo b and vfo A would display --.
I've disconnected the external devices to the acc connection (microham
mkII in this case along with a KAT500) as well as the rs-232
connection to be sure an outside source was not controlling the rig.
I have the KPA3 installed and the rig has been back to Elecraft to
have the gold pins installed.
Any ideas?
Thanks
Rich - N5ZC
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net Please help support this email
list: http://www.qsl.net/donate.html
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net Please help support this email
list: http://www.qsl.net/donate.html
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html