Hi Gary, You didn't indicate if you are running split or diversity. Here's a solution if you are in diversity.
There are times that you would like the RX ANT to be steered to both your MAIN RX and SUB RX. I do that with a splitter on my RX antenna cable. One leg goes to the AUX RF BNC socket for the SUB RX and the other leg goes to the RX ANT IN BNC socket on the KXV3A board. When I want to use my RX antenna for both receivers I press the RX ANT button. I'm still in diversity but I'm using the same antenna for both ears. 73, Mike K2MK Gary Smith-2 wrote > I connect my Rx antenna via the BNC below the SO239 outputs. I have a > sub Receiver and have the Rx on the sub and listen to the vertical > transmitting antenna on the main with my stereo headset. > > There are times when I'd like to only hear the Rx antenna and not the > vertical and to this point to do that, I turn off the audio from the > main receiver & listen with the one ear to the sub Rx. > > Listening to the transmit antenna with both ears I just don't use the > sub rx. The question I'd like to know is: How can I listen to the sub > Rx only with both ears? I could do it by inserting a stereo to mono > adapter in line but that's going to be bothersome quickly. Any easy & > quick way to do this? > > 73, > Gary > KA1J -- View this message in context: http://elecraft.365791.n2.nabble.com/K3-Rx-antenna-tp7583554p7583564.html Sent from the Elecraft mailing list archive at Nabble.com. ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
