With my K2, I use a homebrew interface - see my website www.w3fpr.com
I use none with the K3, just a serial (or USB to serial adapter)
connection to the RS-232 port and the computer soundcard to line in and
line out on the K3 rear panel. The K3 has internal isolation transformers.
For my KX3, I insert isolation transformers between the computer and mic
and headphone output (going directly to the computer soundcard). Some
have found that the transformers are not needed if the KX3 and computer
are adequately bonded.
For the KX3 control cable, I use the KX3USB cable. No interface box
required.
73,
Don W3FPR
On 4/6/2014 10:57 AM, David Cole wrote:
Hello,
What rig interface are most of you all using for computer controlled
radios? What model and why please? I currently have a Rigblaster Pro,
and will be selling it along with the Pro III.
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com
