Tony… There is a SQUELCH slider near the top above the receive window (grayish horizontal bar moving). My slider was in the middle and when I moved the slider to the left all the way, I had solid copy. Where is yours set at?
73, Steve K6SAB On Jun 24, 2014, at 6:47 PM, Tony Lyon <tony.l...@austin.rr.com> wrote: > Folks, > I decided to try HRD/DM780 for first time after using another HF digital > software program for > probably 10 years. I am using an Elecraft K3 and a SignaLink USB interface > and both > MixW and MultiPSK fine with ZERO problems on either RX or TX. With HRD/DM780 > (version 6.2) the K3 > will TX fine (great signal reports), but on RX (with the Audio input set > between 50-60%), I only get about > 90% copy even with a solid OLIVIA signal in the waterfall. I have tried all > kinds of SYNC/TUNE Margins > (while using OLIVIA) to no avail. I have also tried all different levels of > audio RX input to no avail. > If someone could share their SignaLink and any K3 LINE-IN/LINE-OUT config > values to get DM780 to work I > would appreciate it. I have been at this for a week (part time) and still > can't get DM780 to work correctly > with my K3. > > There is clearly a parameter I am missing, but the documentation for setting > up the soundcard for version > is 6.2 is a tad vague. > > 73, > Tony L. (KJ5XF) > > > > > ______________________________________________________________ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:Elecraft@mailman.qth.net > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > Message delivered to sabert...@gmail.com ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com