On 11/1/2014 9:03 AM, Steve Lett wrote:
I have the K3, P3 and KAT500 working just fine. I cannot get any power through the KPA500.
You need a cable to put the KPA500 in TX mode. Two ways to do that, either one works fine. 1) an Aux Cable between the K3 and KPA500. 2) An RCA to RCA cable running the K3 to the KPA500. The AUX cable provides the additional function of bandswitching signals. But the KPA500 can bandswitch by detecting the frequency of RF input -- all it takes is a dit or a tap on the mic. So I use the RCA cable.
73, Jim K9YC ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
