Its not normal verify that you have the correct sound card selected in
FLdigi and that the levels are set correctly.
In the setup under configure sound card first tab
"devices" I have port audio set to the sound card for the rig
(soundblaster in my case)
under "settings" sample rate is native and converter is medium
interpolation. and corrections all 0 and
third tab "right channel" all buttons are clear unchecked.
David Moes
VE3DVY, VE3SD
On 11/22/2014 17:15, James Bennett wrote:
I’ve been using cocoaModem on my iMac for PSK31 QSO’s. Also, I use WSJT-X for
JT65 and JT9. Recently downloaded FLDIGI v 3.22.01 and gave it a try. It works,
but…..
When I transmit, I get absolutely no indication of RF being sent. The K3 goes
into transmit mode, but I get no ALC action on the K3 meter. I know I’m getting
RF out because (1) my KPA500 (in standby mode) is showing 30 watts, and (2)
I’ve had several QSO’s on PSK31. If I bring up cocoaModem and transmit, I get
the ALC action that I’m used to seeing: the fifth bar flickering. Same thing
with WSJT-X. But for some reason, when I transmit with FLDIGI - nada, zip, zero
indication.
Is this “normal”? If so, how would one ever set audio levels w/o having any
indication of audio actually flowing? What do I have set wrong?
Thanks, Jim / W6JHB
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [email protected]
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [email protected]
