Be Carfull you really should have four bars and fifth blinking if
its below that you can get some strange fluctuations on the output
power. so a compromise between programs is not the best idea. When the
K3 is in DATA A mode the mic gain will adjust the level for the line
in so adjustment when using different programs is easy.
level differences can be a problem with running multiple programs
for digital as they seems to have different algorithms and different
output levels I no longer use FLdigi and have moved to MMVARI as it
has internal TX level adjustment that is independent of the soundcard
level. with this I can match the output with the WSJT-X and
MMSSTV. I can't seem to find this independent control for FLdigi. I
have only tried Coacomodem some time ago but I believe it too has an
independent level control that may help in matching levels with other
programs although I cant remember if that setting is linked to the
windows levels or not
I don't believe that WSJT-X has this though.
David Moes
President: Peterborough Amateur Radio Club.
dm...@nexicom.net
VE3DVY, VE3SD
On 11/23/2014 18:06, James Bennett wrote:
John - thanks - that hit the nail on the head for me. The setting I
had on
my external audio card?s output control was sufficient given the K3?s
Mic level that I was using with cocoaModem and WSJT-X. However, as you
pointed out, it was not sufficient enough for FLDIGI to ?tickle? the
K3. So - I increased the audio card output a bit until I saw the K3?s
ALC bars light up, then backed down on the K3?s Mic gain. Now it?s
working just fine with FLDIGI, cocoaModem, and WSJT-X.
Much appreciated for the replies from both of you - case closed!
73, Jim / W6JHB
On Sunday, Nov 23, 2014, at Sunday, 2:13 PM, John Nelson
<j...@happyvalleybiz.com> wrote:
The same thing happens in my setup, if the audio level from the
sound card
to the K3 is too low. Nothing will appear in the ALC window, no
matter how high I turn up the mic gain. Once establishing a minimum
audio level, the ALC will show four bars with the fifth flickering at
a mic level of 7. It's very touchy for me to get just right, but I am
probably using sub-optimal sound cards. Works fine, though, for all
the digital modes.
John / W3DN
On 11/23/2014 4:34 PM, James Bennett wrote:
Hi david - thanks for the reply to my post.
Unfortunately, no improvement. I have everything set exactly as you
suggest (it was already that way) and the result is the same. I type
in some text, press T/R and: the K3 goes into transmit mode, RF flows
out the radio to the antenna, but no ALC indication on the K3 ALC
meter. I shut down FLDIGI, bring up cocoaModem and do EXACTLY the same
thing with absolutely no changes, and I get the RF out, but with the
fifth ALC bar flickering. Funky, huh?
Jim / W6JHB
On Sunday, Nov 23, 2014, at Sunday, 6:18 AM, david Moes
<dm...@nexicom.net> wrote:
Its not normal verify that you have the correct sound card
selected in
FLdigi and that the levels are set correctly.
In the setup under configure sound card first tab
"devices" I have port audio set to the sound card for the rig
(soundblaster in my case)
under "settings" sample rate is native and converter is medium
interpolation. and corrections all 0 and
third tab "right channel" all buttons are clear unchecked.
David Moes
VE3DVY, VE3SD
On 11/22/2014 17:15, James Bennett wrote:
I?ve been using cocoaModem on my iMac for PSK31 QSO?s. Also, I use
WSJT-X for JT65 and JT9. Recently downloaded FLDIGI v 3.22.01 and gave
it a try. It works, but?..
When I transmit, I get absolutely no indication of RF being sent.
The
K3 goes into transmit mode, but I get no ALC action on the K3 meter. I
know I?m getting RF out because (1) my KPA500 (in standby mode) is
showing 30 watts, and (2) I?ve had several QSO?s on PSK31. If I bring
up cocoaModem and transmit, I get the ALC action that I?m used to
seeing: the fifth bar flickering. Same thing with WSJT-X. But for some
reason, when I transmit with FLDIGI - nada, zip, zero indication.
Is this ?normal?? If so, how would one ever set audio levels w/o
having
any indication of audio actually flowing? What do I have set wrong?
Thanks, Jim / W6JHB
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net
Please help support this email list:
http://www.qsl.net/donate.html
Message delivered to dm...@nexicom.net
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to w6...@me.com
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to j...@happyvalleybiz.com
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to w6...@me.com
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to dm...@nexicom.net
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to n...@whitemesa.com