Oh, it was broken and sold that way to me.. In order to hear “something” out of the speaker, you have to insert a headphone into the hole about 1/2 way lol Frank
On Dec 6, 2014, at 7:49 PM, Phil Wheeler <w...@socal.rr.com> wrote: > The headphone jack should be unrelated to the mic config header and the KSB2 > board. Why do you think you need a new headphone jack, Frank? > > Phil W7OX > > On 12/6/14 5:47 PM, Frank Krozel wrote: >> So guess replacing my “headphone jack” will be a part of this process as >> well. >> Frank >> >> On Dec 6, 2014, at 7:39 PM, Matt VK2RQ <matt.vk...@gmail.com> wrote: >> >>> The “missing” PCB header is supplied with the KSB2 SSB option module. If >>> you order a MH2 microphone, you’ll get a packet of PC-style jumpers to >>> bridge the header. Otherwise, if you use a different type of microphone, >>> you need to take care for the jumping yourself. The “UNPCB” guy sells a >>> nice jumpering PCB that allows you to easily change the jumper setup for a >>> range of standard mics, suggest you look it up below (look for “Internal >>> Mic Adaptor”): >>> http://www.unpcbs.com/ >>> >>> >>> 73, Matt VK2RQ. >>> >>>> On 7 Dec 2014, at 12:36 pm, Frank Krozel <kg9hfr...@gmail.com> wrote: >>>> >>>> All I “see” are pc holes that are unpopulated. I am thinking there is a >>>> header missing or similar. >>>> I was kind of looking for a jumper block. >>>> Frank' >>>> On Dec 6, 2014, at 7:27 PM, Phil Wheeler <w...@socal.rr.com> wrote: >>>> >>>>> Frank, for the K2 (I think that's the rig you mean) the info you need is >>>>> in this document "ELECRAFT KSB2 S SB ADAPTER >>>>> Assembly and Operating Instructions". Near the end is the info for >>>>> configuring it for various mics. >>>>> >>>>> When you said "Mine was inoperative when I got it used" do you mean on >>>>> SSB or completely? Does it have the KSB2 option installed? >>>>> >>>>> 73, Phil W7OX >>>>> >>>>> On 12/6/14 5:20 PM, Frank Krozel wrote: >>>>>> Guys, I am about ready to place an order to Elecraft and one of the >>>>>> items I will be needing are a few of the connectors like P3, P6, and the >>>>>> headphone jack. Mine was inoperative when I got it used.. >>>>>> Where is the jumper block for the mic? Been staring at the pictures and >>>>>> cannot find the manual where it shows where the jumper block is. >>>>>> I guess it is on the control panel but cannot find any picture of that >>>>>> in case I need some additional connectors. >>>>>> (I got it used and it is in perfect condition!!) >>>>>> Frank KG9H > ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com