When you place your order, mention in the comments section that you want a headphone jack or two (email parts at elecraft dot com to get the part number/pricing). When I bought my K2 I ordered an extra headphone jack as a spare because I heard they can wear out after some time.
73, Matt VK2RQ > On 7 Dec 2014, at 12:52 pm, Frank Krozel <kg9hfr...@gmail.com> wrote: > > Oh, it was broken and sold that way to me.. In order to hear “something” out > of the speaker, you have to insert a headphone into the hole about 1/2 way lol > Frank > >> On Dec 6, 2014, at 7:49 PM, Phil Wheeler <w...@socal.rr.com> wrote: >> >> The headphone jack should be unrelated to the mic config header and the KSB2 >> board. Why do you think you need a new headphone jack, Frank? >> >> Phil W7OX >> >>> On 12/6/14 5:47 PM, Frank Krozel wrote: >>> So guess replacing my “headphone jack” will be a part of this process as >>> well. >>> Frank >>> >>>> On Dec 6, 2014, at 7:39 PM, Matt VK2RQ <matt.vk...@gmail.com> wrote: >>>> >>>> The “missing” PCB header is supplied with the KSB2 SSB option module. If >>>> you order a MH2 microphone, you’ll get a packet of PC-style jumpers to >>>> bridge the header. Otherwise, if you use a different type of microphone, >>>> you need to take care for the jumping yourself. The “UNPCB” guy sells a >>>> nice jumpering PCB that allows you to easily change the jumper setup for a >>>> range of standard mics, suggest you look it up below (look for “Internal >>>> Mic Adaptor”): >>>> http://www.unpcbs.com/ >>>> >>>> >>>> 73, Matt VK2RQ. >>>> >>>>> On 7 Dec 2014, at 12:36 pm, Frank Krozel <kg9hfr...@gmail.com> wrote: >>>>> >>>>> All I “see” are pc holes that are unpopulated. I am thinking there is a >>>>> header missing or similar. >>>>> I was kind of looking for a jumper block. >>>>> Frank' >>>>> On Dec 6, 2014, at 7:27 PM, Phil Wheeler <w...@socal.rr.com> wrote: >>>>> >>>>>> Frank, for the K2 (I think that's the rig you mean) the info you need is >>>>>> in this document "ELECRAFT KSB2 S SB ADAPTER >>>>>> Assembly and Operating Instructions". Near the end is the info for >>>>>> configuring it for various mics. >>>>>> >>>>>> When you said "Mine was inoperative when I got it used" do you mean on >>>>>> SSB or completely? Does it have the KSB2 option installed? >>>>>> >>>>>> 73, Phil W7OX >>>>>> >>>>>>> On 12/6/14 5:20 PM, Frank Krozel wrote: >>>>>>> Guys, I am about ready to place an order to Elecraft and one of the >>>>>>> items I will be needing are a few of the connectors like P3, P6, and >>>>>>> the headphone jack. Mine was inoperative when I got it used.. >>>>>>> Where is the jumper block for the mic? Been staring at the pictures >>>>>>> and cannot find the manual where it shows where the jumper block is. >>>>>>> I guess it is on the control panel but cannot find any picture of that >>>>>>> in case I need some additional connectors. >>>>>>> (I got it used and it is in perfect condition!!) >>>>>>> Frank KG9H >> > ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com