I believe a lot of folks have had a problem with that jack. It sounds
(no pun ) like you may need a replacement
Tom, wb2qdg
K2 1103
On 12/6/2014 8:52 PM, Frank Krozel wrote:
Oh, it was broken and sold that way to me.. In order to hear “something” out of
the speaker, you have to insert a headphone into the hole about 1/2 way lol
Frank
On Dec 6, 2014, at 7:49 PM, Phil Wheeler <w...@socal.rr.com> wrote:
The headphone jack should be unrelated to the mic config header and the KSB2
board. Why do you think you need a new headphone jack, Frank?
Phil W7OX
On 12/6/14 5:47 PM, Frank Krozel wrote:
So guess replacing my “headphone jack” will be a part of this process as well.
Frank
On Dec 6, 2014, at 7:39 PM, Matt VK2RQ <matt.vk...@gmail.com> wrote:
The “missing” PCB header is supplied with the KSB2 SSB option module. If you
order a MH2 microphone, you’ll get a packet of PC-style jumpers to bridge the
header. Otherwise, if you use a different type of microphone, you need to take
care for the jumping yourself. The “UNPCB” guy sells a nice jumpering PCB that
allows you to easily change the jumper setup for a range of standard mics,
suggest you look it up below (look for “Internal Mic Adaptor”):
http://www.unpcbs.com/
73, Matt VK2RQ.
On 7 Dec 2014, at 12:36 pm, Frank Krozel <kg9hfr...@gmail.com> wrote:
All I “see” are pc holes that are unpopulated. I am thinking there is a header
missing or similar.
I was kind of looking for a jumper block.
Frank'
On Dec 6, 2014, at 7:27 PM, Phil Wheeler <w...@socal.rr.com> wrote:
Frank, for the K2 (I think that's the rig you mean) the info you need is in this
document "ELECRAFT KSB2 S SB ADAPTER
Assembly and Operating Instructions". Near the end is the info for configuring
it for various mics.
When you said "Mine was inoperative when I got it used" do you mean on SSB or
completely? Does it have the KSB2 option installed?
73, Phil W7OX
On 12/6/14 5:20 PM, Frank Krozel wrote:
Guys, I am about ready to place an order to Elecraft and one of the items I
will be needing are a few of the connectors like P3, P6, and the headphone
jack. Mine was inoperative when I got it used..
Where is the jumper block for the mic? Been staring at the pictures and cannot
find the manual where it shows where the jumper block is.
I guess it is on the control panel but cannot find any picture of that in case
I need some additional connectors.
(I got it used and it is in perfect condition!!)
Frank KG9H
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to th...@att.net
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com