Thank you Bruce (and also thank you David Ahrendts, KC0XT)
This is what I needed. Looks like everything is going to work out just
fine!
Now I can switch to the other window and press "enter" on the order
page ;-)
73 and thanks again,
Stan WB2LQF
On Tue, Dec 09, 2014 at 06:32 PM, Bruce Beford wrote:
Hi, Stan
I'm not sure how you want this measured, so here's a couple of
measurements
for you...
Using the PX3CBL cable kit that comes with the PX3, the maximum
separation
between the two units is about 8 inches.(from the right of the PX3 to
the
left of the KX3)
Measured from the outside edges (that is, with the PX3 on the left of
the
KX3), the maximum distance between the left edge of the PX3 and the
right
edge of the KX3 is 21".
I hope this helps. Let me know if you would like different dimensions
measured.
GL es 73,
Bruce N1RX
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to sjl...@optonline.net
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com
