Waddaya bet some entrepreneur makes a rear box so both can be a single solid
unit?
Howzatt for cool?
Of course, there's always duct tape.
Chas
----- Original Message -----
From: "Howard Hoyt" <hh...@mebtel.net>
To: <Elecraft@mailman.qth.net>
Sent: Wednesday, December 10, 2014 12:18 AM
Subject: [Elecraft] PX3 question
Stan,
If you position the PX3 to the left of the KX3, the two units can be
positioned within 0.5" of each other when using all right-angle plugs,
which makes the combined chassis width 13.5".
We make a #33-100 KX3 & PX3 DC Power Splitter which helps facilitate neat
cable management for users of the KX3 & PX3
(https://proaudioeng.com/accessories/). If you are using straight plugs
for your headset, you can position them as much as 2.25" apart and still
use the splitter.
You could also reverse the positions, in which case if you are using the
splitter the PX3 can be positioned up to 1.25" to the right of the KX3,
and you would have to use a right-angle BNC for the antenna connector.
An additional 1" or more of separation can be achieved by removing the
heatshrink and tape holding the two conductors of the splitter if
necessary.
Cheers & 73,
Howie - WA4PSC
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to pin...@erols.com
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com
