On 12/24/2014 4:26 AM, Mike K2MK wrote:
Hi John,
Are you sure your external speaker is plugged in to the speaker jack and not
the rear headphone jack?
73,
Mike K2MK
John McBee-2 wrote
Problem still exist, however I have discovered that if I turn on spkr+ph
to on, I have audio fine without headphones plugged in, but if I change
it to spkr+ph to NO then the audio in speaker shuts off with no
headphones plugged in. I have sprayed my phone connector plug with
Eledtronic cleaner and put in phone jack and turned it and still no
audio out speaker with phone plug out. When I turned on my K3 this
evening before doing the test, I could not get any audio out speaker at
all. Before it was hit and miss. So question again, cud it be phone
plug on the K3 or firmware issue? Firmware agn is MCU 4.86.
Thanks
John
--
View this message in context:
http://elecraft.365791.n2.nabble.com/K3-phone-plub-tp7596284p7596323.html
Sent from the Elecraft mailing list archive at Nabble.com.
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to jrmc...@cox.net
I don't have an external speaker plugged into the K3. I'm using the
front headphone jack for the headphones only.
John
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com
