Doug,
Its not difficult if you do not mind soldering a disc ceramic cap to
the subreceiver board and running some RG-174. I outlined how I did
that on my webpage:
http://www.kl7uw.com/LINRAD.htm
Scroll down the page until you come to the heading:
Connecting K3 Sub-Receiver IF to LP-Pan:
Connection is near the noise blanker jack-J78, pin1 and W3.
Just solder a .001 uF disc ceramic cap and attach other end to center
conductor of the RG-174.
Full instructions on my website. Use static protection while
handling the open sub-receiver.
73, Ed - KL7UW
------------------------------------------
From: Doug Ellmore <d...@ellmore.net>
To: elecraft@mailman.qth.net
Subject: [Elecraft] IF out of 2nd Receiver in K3?
Message-ID:
<canan7wwcmqptd9qmpa+3zj73tlexsxjzby1vsxdy+yqsrlm...@mail.gmail.com>
Content-Type: text/plain; charset=ISO-8859-1
Is there a way to get the IF out of the optional 2nd receiver of a K3?
In addition to looking at two different bands in HF, I am thinking it would
be great to be able to look at both 6m and 2m for field day with one K3.
Doug NA1DX
na...@arrl.net
www.ellmore.net/na1dx
73, Ed - KL7UW
http://www.kl7uw.com
"Kits made by KL7UW"
Dubus Mag business:
dubus...@gmail.com
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com