Jeremy,

The wattmeter in the KAT100 has been damaged - diodes D1 and D2.
You also have the KPA100, and it has a wattmeter with those diodes - so order 4 just in case those need to be replaced too.
We can get to the KPA100 after the KAT100 has been taken care of.

Failure to disconnect the antenna from the K2 when not in use will damage those diodes from static coning in from the feedline(s).

73,
Don W3FPR

On 7/20/2015 8:36 PM, JeremyJones wrote:
Ok, redid the tests in CAL mode with the following results:
160M 1.03:1     No LED indication on KAT100.  K2 showed 1.0:1  Hi Current
warning
80M     1.03:1  No LED indication on KAT100.  K2 showed 1.0:1  Hi Current 
warning
60M     1.02:1  No LED indication on KAT100.  K2 showed 1.0:1  Hi Current 
warning
40M     1.03:1  LEDs on KAT100 lit up to 3.   K2 showed 3.0:1  Hi Current 
warning
30M     1.03:1  LEDs on KAT100 lit up to 3.   K2 showed 3.0:1  Hi Current 
warning
20M     1.00:1  LEDs on KAT100 lit up to 2.5. K2 showed 2.6:1  Hi Current 
warning
17M     1.04:1  LEDs on KAT100 lit up to 1.7. K2 showed 1.8:1  Hi Current 
warning
15M     1.04:1  LEDs on KAT100 lit up to 2.   K2 showed 2.0:1
12M     1.05:1  LEDs on KAT100 lit up to 1.7. K2 showed 1.8:1
10M     1.06:1  LEDs on KAT100 lit up to 2.   K2 showed 2.0:1

I guess ordering from Elecraft is the safest bet.  It will take a bit
longer, but so be it.



--
View this message in context: 
http://elecraft.365791.n2.nabble.com/KAT100-Tuning-Failure-tp7605018p7605174.html
Sent from the Elecraft mailing list archive at Nabble.com.
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to w3...@embarqmail.com


______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com

Reply via email to