Byron,
Thanks! I will check my serial cable pinout, I think I'm using a
straight thru with all pins connectd. I may have to make a cable with
just the pins connected that the manual specifies.
Gordon - N1MGO
On 10/22/2015 01:21 PM, Byron Servies wrote:
Hi Gordon,
I recently, and finally, got to the point where I needed to set up
band maps in my KRC2. I also use PCIe serial cards and Windows 10 and
the problem I had was the cable. Once I built a cable using exactly
the pinouts in the KRC2 manual (instead of cables I had laying
around), it worked fine, as did the firmware update.
Sorry I cannot be of more help, but that is what worked for me.
73, Byron N6NUL
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com
