Hi All,
This weekend my K3 stopped working with FSK. AFSK works just
fine. I have ran many RTTY contests with the K3 in FSK mode, using
various software drivers. The problem is I get a single tone, but at
the wrong frequency, Its about 200hz, not 2125Hz. I checked the pitch
setting, its still setup for High tones, the radio keys just fine, I
have not checked the fsk input signal, but even if that was bad and not
toggling I should still have an output at the Mark frequency, not way
low at ~200hz.
I reloaded firmware, - no change. The K3 is a mid 5000 serial number
and has worked flawless for many years of RTTY contests.
This one has me baffled, any suggestions? (I switched to AFSK
setup for now).
Gordon - N1MGO ("Bambi" on RTTY)
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com
