Hi Robert, If you are using VOX there should be no difference in the delay between using your paddle and using your PC. It sounds like N1MM is still sending a PTT command over the serial link. You can prove this by changing CONFIG:PTT-KEY to OFF-OFF on your K3.
73, Mike K2MK s57aw wrote > Hi, > > Simple question... Is there a way to avoid VOX delay on CW mode when PTT > is > used? > > To be more concrete: > > - CW and PTT signal are sent to K3 with N1MM directly from serial port (no > external keyer) > - external electronic keyer is connected to K3 > - VOX is enabled > > If I want CW keyer to work without PTT / paddle then VOX has to be > enabled, > but VOX brings unwanted delay at the end when CW is sent from PC. > > 73 Robert, S57AW -- View this message in context: http://elecraft.365791.n2.nabble.com/VOX-PTT-combination-on-k3-tp7611619p7611620.html Sent from the Elecraft mailing list archive at Nabble.com. ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com