Once you have enabled VOX, you are stuck with whatever delay it imposes.
In effect, the VOX and PTT functions are in a logical OR relationship -
if either one of them wants the rig to be in transmit, it will be in
transmit. In your current setup you could disable computer PTT control
entirely and you would not see any difference.
There is a way to set the VOX delay to nearly zero, and that is to
enable QSK. With PTT and QSK enabled, your computer messages will be
controlled by PTT (no RX between characters), but your paddle-sent CW
will be QSK. If you are using a non-QSK amplifier, this won't work for you.
Without using QSK, you can reduce the VOX delay in the K3, but if you
are using an external amplifier that is not capable of QSK, the
amplifier may impose a lower limit on the VOX delay you can safely use,
i.e. you may want to have a VOX delay long enough to prevent returning
to RX between characters, and maybe also between words, during paddle
input, and that VOX delay will also affect the end of computer messages.
If you have an external keyer that has a PTT output, you can wire-OR the
keyer's PTT output with the PTT signal from the computer. When the
computer is sending, PTT will be asserted by the computer and there will
be no RX during messages, but no delay in the return to RX at the end of
the messages. When you are sending from the paddle, the delay will be
controlled by the keyer's PTT settings. If you have a non-QSK amplifier
you will have to configure the delay in the keyer to accommodate the
amplifier, but the delay will only apply to paddle-sent CW, not to
computer-sent messages.
73,
Rich VE3KI
S57AW wrote:
Simple question... Is there a way to avoid VOX delay on CW mode when PTT is
used?
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com