The WinKey http://k1el.tripod.com/ , in conjunction with N1MM
Logger+, does this beautifully. It has separate delay
adjustments for paddle-generated and computer-generated CW. You
can set the computer delay to zero and the paddle delay to a hang
time of 1 to 2 letter spaces, so the paddle delay works at any
speed.
Dave Hachadorian, K6LL
Yuma, AZ
-----Original Message-----
From: Robert Bajuk
Sent: Saturday, December 19, 2015 5:28 AM
To: elecraft@mailman.qth.net
Subject: [Elecraft] VOX / PTT combination on k3
Hi,
Simple question... Is there a way to avoid VOX delay on CW mode
when PTT is
used?
To be more concrete:
- CW and PTT signal are sent to K3 with N1MM directly from serial
port (no
external keyer)
- external electronic keyer is connected to K3
- VOX is enabled
If I want CW keyer to work without PTT / paddle then VOX has to
be enabled,
but VOX brings unwanted delay at the end when CW is sent from PC.
73 Robert, S57AW
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net
Please help support this email list:
http://www.qsl.net/donate.html
Message delivered to k6ll.d...@gmail.com
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com
