On Mon,12/28/2015 6:40 PM, Mark Goldberg wrote:
I have replaced UHF connectors with N connectors where I can, use nothing worse than RG214 or LMR400 for interconnects at my station, and have the interconnects as short as possible. I built many cables with exactly the connectors and lengths needed so I avoid adapters.
All of this is good EXCEPT that N connectors are NOT superior to good quality UHF connectors (Amphenol 83-1SP) for use on the HF bands. Yes, N-connectors are 50 ohm connectors, while UHF connectors are a bit off of that, but it simply does not matter below 50 MHz, and it matters very little below 200 MHz.
73, Jim K9YC 73, Jim K9YC ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com