That is exactly what I am attempting to do here, Hence my question as to why I am unable to get the P3 to take a macro via the USB port... I want it on the Genovation keypad, not the P3 case. -- Thanks and 73's, For equipment, and software setups and reviews see: www.nk7z.net
For MixW support see; http://groups.yahoo.com/neo/groups/mixw/info For Dopplergram information see: http://groups.yahoo.com/neo/groups/dopplergram/info For MM-SSTV see: http://groups.yahoo.com/neo/groups/MM-SSTV/info On Sun, 2016-01-24 at 10:21 -0800, Bill Frantz wrote: > With this facility, I would consider using a micro controller to implement > two functions: > > P3 for split mode: Read VFOs A and B. Set center and span so A > and B VFOs are on opposite sides of the display. To use, tune > in the DX on A and put B just above the pileup. Press the > button. > > P3 for band scanning: Band edge aware setup for fixed spans, > e.g. 50KHz, 100KHz 200KHz. Read VFO A. Set span to the fixed > span. Set the center so the VFO is near the center of the > display and the lower edge is a multiple of half the span above > the bottom edge of the band. > > 73 Bill AE6JV > > On 1/24/16 at 9:14 AM, d...@nk7z.net (David Cole) wrote: > > > ... is there a way to trigger the P3 to accept a macro designed for > > the P3 itself, using the rear USB connector on the P3? > > > > In essence, I want to be able to control the P3 via it's own macro set > > using the USB connector in the rear of the P3 itself. Is this possible? > > ----------------------------------------------------------------------- > Bill Frantz |The nice thing about standards| Periwinkle > (408)356-8506 |is there are so many to choose| 16345 Englewood Ave > www.pwpconsult.com |from. - Andrew Tanenbaum | Los Gatos, CA 95032 > > ______________________________________________________________ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:Elecraft@mailman.qth.net > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > Message delivered to d...@nk7z.net ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com