CAT definitely working - the freq changes in WSJT-X when I spin VFO A. K3S set as default device playback and recording "USB Audio CODEC" on the laptop. Plenty of PWR out when I hit TUNE on the K3S. When I hit the Tune button in WSJT I get a steady tone. 73, Ian N8IK
-----Original Message----- From: Elecraft [mailto:elecraft-boun...@mailman.qth.net] On Behalf Of Bob McGraw K4TAX Sent: Monday, January 25, 2016 17:09 To: elecraft@mailman.qth.net Subject: Re: [Elecraft] K3S and WSJT-X I'll make screen shots if needed. Be sure you have CAT interface working and then the correct AUDIO CODEC selected in the application. The radio should be in Data mode. When you select TUNE you should hear the tone in the MONITOR, radio should switch to transmit, the PWR slider to the right controls the audio level. The Speaker CODEC on the computer should be about 50%. This should have about 4 to 5 bars showing on the ALC meter. Line gain on the radio at about #20. 73 Bob, K4TAX On 1/25/2016 3:53 PM, Ian wrote: > WSJT-X 1.6.0, PTT method = CAT, VOX enabled on K3S, 50w pwr but no > envelope on the P3 > > > -----Original Message----- > From: Elecraft [mailto:elecraft-boun...@mailman.qth.net] On Behalf Of > Tom Crayner > Sent: Monday, January 25, 2016 16:19 > To: elecraft@mailman.qth.net > Subject: Re: [Elecraft] K3S and WSJT-X > > Ian, > > Which rev level of WSJT-X are you trying to use? > > I seem to recall 1.5.x had some issues with Hamlib and as a result > some of the PTT code was broke. > > If you are running 1.6.0 I think the Hamlib stuff is fixed and you can > use > K3/KX3 as a rig and then set PTT to CAT. > > If you plan on running DX Commander at some point you can install it, > configure it to mange the radio under the config->port options of DX > Commander and then point WSJT-X to it by selecting DX Commander as the "rig" > in Settings->Radio. Then DX COmmander does the heavy lifting and > avoids the broken Hamlib piece. This should work in 1.5.x and 1.6. > > Tom (W2YF) > > > On Mon, Jan 25, 2016 at 11:52 AM, Ian <ik7...@verizon.net> wrote: > >> I have a single USB cable between the K3S and the laptop and no >> problem decoding JT65 signals with DATA A. "CAT Control" is set for >> COM4 and 38400-N-8-1. Any hints on setting the "PTT Method" parameters? >> >> >> >> 73, Ian N8IK >> >> s/n 10111 >> >> >> > ______________________________________________________________ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:Elecraft@mailman.qth.net > > This list hosted by: http://www.qsl.net Please help support this email > list: http://www.qsl.net/donate.html Message delivered to > ik7...@verizon.net > ----- > No virus found in this message. > Checked by AVG - www.avg.com > Version: 2016.0.7357 / Virus Database: 4522/11485 - Release Date: > 01/25/16 > > ______________________________________________________________ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:Elecraft@mailman.qth.net > > This list hosted by: http://www.qsl.net Please help support this email > list: http://www.qsl.net/donate.html Message delivered to > rmcg...@blomand.net > ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to ik7...@verizon.net ----- No virus found in this message. Checked by AVG - www.avg.com Version: 2016.0.7357 / Virus Database: 4522/11485 - Release Date: 01/25/16 ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com