Excellent news, Ed. Thanks for posting!
73, Phil W7OX
On 5/20/16 9:10 PM, Ed Muns wrote:
I have been using a Begali Adventurer Mono on my KX2 SN 20 for several weeks
now with no problem. The screws look short enough and are not anywhere
close to the PCB.
This morning (Friday) before the Dayton vendor displays opened, I had Wayne
look at my paddle and he verified that the screws were short enough.
Ed W0YK
-----Original Message-----
From: Elecraft [mailto:elecraft-boun...@mailman.qth.net] On Behalf Of Phil
Wheeler
Sent: Thursday, May 19, 2016 5:30 PM
To: elecraft@mailman.qth.net
Subject: Re: [Elecraft] Announcing the KX2 80-10 m, SSB/CW/Data transceiver
Mike,
From the KX2 FAQ
http://www.elecraft.com/manual/KX2%20FAQ%20v-1-1a.pdf
"Q:
Can I use a KXPD3 with the KX2?
A:
Yes; however, you may need to update the KXPD3. If your KXPD3 has one thumb
screw that's longer than the other, order part no. E700425 to replace the
original left-hand thumb screw on the KXPD3. Use of the original longer
thumb screw would damage the KX2."
So it appears the Adventure mount will fit, but that we may need to shorten
the screws a bit. Not sure what "a bit" is!
73, Phil W7OX
On 5/19/16 3:16 PM, Mike via Elecraft wrote:
Will the Begali "Adventure" paddles fit the KX2 as well as the KX3?
Mike KD8RQE
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com
