Clay,
The K3 and K3S schematics are the same with respect to that connector.
73,
Don W3FPR
On 7/15/2016 11:35 PM, Clay Autery wrote:
RR... I just cracked the K-pod manual and see that the cable is an
RJ-25 cable... different pinouts from the RJ-12. (both 6P6C).
I need the signals crossed with the pin numbers... or colors...
No schematics for the K3s... I guess I'll try the K3 manual to see if
it is at all illuminating...
______________________
Clay Autery, KY5G
MONTAC Enterprises
(318) 518-1389
On 7/15/2016 9:36 PM, Ron D'Eau Claire wrote:
Don is correct but, actually, the connector is a 6PC6 male. The "RJ" numbers
refer to the wiring AND connector. So it is NOT an RJ12 cable since only 5
conductors are used.
73, Ron AC7AC
---
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to donw...@embarqmail.com
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com