I have built a switch to switch radios to a particular antennas to take to our club shack. The best isolation I could get was 37dbm. Not good enough, so we are moving a jumper between UHF connectors.
Sent from my iPad > On Oct 22, 2016, at 7:12 PM, Jim Miller <j...@jtmiller.com> wrote: > > I'm considering adding a bigger amp to the shack. I'd like to continue to > use the KPA/KAT combo for quick hits and the bigger amp if/when needed. So > I'd like to make it convenient to switch between them. > > The people I've talked to so far actually move coax to make the switch. I'd > like to avoid that. > > I'd need to switch the K3s output from the KPA to the AL1500 and obviously > switch the outputs as well. > > Obviously I'd also need to set the non-KPA power out of the K3 to the per > band power needed by the AL1500. I seldom run 100w so that wouldn't be a > big deal. > > I'd love to hear from anyone who has done this without screwing/unscrewing > UHF connectors. > > Extra credit for idiot proofing. ;-) > > 73 > > jim ab3cv > ______________________________________________________________ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:Elecraft@mailman.qth.net > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > Message delivered to k2cm.geo...@gmail.com ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com