Winner, Winner chicken Dinner!!! Tnx Gene for providing what seems to be the answer to my problem. By selecting the”Unsafe” mode in the Config menu for the USB port as described below, the K3S now works in RTS-DTR every time. I appreciate your help. This group is truly something else when it comes to helping each other out. Not necessarily included in the price of the radio, but one of the benefits of owning an Elecraft product. Tnx agn to All who replied directly and through the Elecraft reflector.
Best 73 Jeff W7JW From: n...@comcast.net Sent: Monday, October 24, 2016 11:00 AM To: Jeff Subject: Re: PTT reset default power down Hi Jeff, Try this, PTT/KEY USE WITH THE USB PORT IMPROVED: Some PC applications can control PTT and KEY at the K3S via the RTS/DTR signals of the USB port. However, use of these signals may also allow the PC’s USB port initialization to unexpectedly activate transmit at the K3S. This can happen if the computer is turned on after the K3S, or if the USB cable is not connected. There is now a "Safe" mode (the default) which disables PTT-KEY transmit until the K3S receives a command via USB, such as a read of the rig's VFO frequency. To turn on safe mode on/off, go into CONFIG:PTT-KEY and tap '1' to select "USB SAFE" or "UNSAFE". Exit the menu and turn the K3S off/on. Applications that use PTTKEY via USB but never send commands may require "UNSAFE" mode. In this case, unwanted transmit can be avoided by turning the PC on before the K3S. http://www.elecraft.com/manual/E740258E%20K3S%20Owner's%20man%20errata%20A1-2.pdf 73, Gene N9TF K3S 10057 -------------------------------------------------------------------------------- From: "Jeff" <w...@charter.net> To: "elecraft" <Elecraft@mailman.qth.net> Sent: Monday, October 24, 2016 8:24:14 AM Subject: [Elecraft] (no subject) Good morning. I am having a problem getting my K3S to save in the config menu the setting for PTT-PTT. When I set it for RTS-DTR, hit menu it works fine. Then I turn the radio off and back on and the PTT-PTT setting is back to OFF-OFF. What am I doing wrong? How do I get the Config menu to save the PTT-PTT setting to RTS-DTR? Tnx Jeff W7JW ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to n...@comcast.net ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com