John/Barry

Thanks for the quick responses.   I’ll be setting up the other side tomorrow.  
I think when I had them working at home I had both units connected before I 
fired up the mini, so I didn’t have the problem.

73,

Jim


> On Oct 29, 2016, at 5:39 PM, John <j...@eeek.org.uk> wrote:
> 
> Jim,
> 
> This is actually quite a simple one, luckily!
> 
> I'm assuming when you say RRC you mean the MicroHAM RemoteRig Control system 
> - I've helped set these up and test them for a couple of years now, so 
> assuming I've got that bit right...
> 
> It simply means that it's unable to talk to the other end (ie the kit you 
> haven't connected at the far end).
> 
> The MicroHAM RRC systems use SIP over UDP on three different ports - one for 
> voice data, one for CAT data, and one for control signals between the remote 
> head and the unit body. If it's a SIP connection error you're seeing, it's 
> because the two ends of the RRC system can't see each other (which, as you 
> say, is the correct case because you haven't hooked up the remote unit yet).
> 
> If I'm barking up the wrong tree, please correct me.
> 
> 73, and a firm left handshake,
> John (XLX)
> 
> -----Original Message-----
> From: Elecraft [mailto:elecraft-boun...@mailman.qth.net] On Behalf Of Jim Cary
> Sent: 29 October 2016 22:27
> To: elecraft@mailman.qth.net
> Subject: [Elecraft] K3 Mini Error question
> 
> I just packed up both my control and remote systems and moved them down to my 
> ZF QTH, where they will be permanent.
> 
> I have the K3 mini hooked up to the control RRC unit, but haven’t hooked up 
> the remote unit yet/
> 
> When I powered up the mini, and turned the volume control I got a three tone 
> warning signal.  The light over the aux/mic cable is flashing yellow, which 
> according to the Remote Rig manual means the SIP connection has failed…. but 
> it isn’t clear what that means or what to do about it.  I’ve checked and 
> doubled checked all the connections and they look good.
> 
> Does anyone not in the CQ contest (!!!) have an idea?
> 
> Jim
> W2SM
> ZF2LC
> 
> 
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft@mailman.qth.net
> 
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html Message 
> delivered to j...@eeek.org.uk
> 

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com

Reply via email to