No worries Jim, glad to be of assistance. I've actually been testing a couple of these for a couple of years now, helping a friend who's bought them. We've had a whole world of pain with some bits (not RRC related, but network related) in the past, so if you have any more issues on that front, do shout and I'll see what I can do to help.
John (XLX) -----Original Message----- From: Jim Cary [mailto:jimlc...@gmail.com] Sent: 29 October 2016 22:45 To: John <j...@eeek.org.uk>; Barry Baines <bbai...@mac.com> Cc: elecraft@mailman.qth.net Subject: Re: [Elecraft] K3 Mini Error question John/Barry Thanks for the quick responses. I’ll be setting up the other side tomorrow. I think when I had them working at home I had both units connected before I fired up the mini, so I didn’t have the problem. 73, Jim > On Oct 29, 2016, at 5:39 PM, John <j...@eeek.org.uk> wrote: > > Jim, > > This is actually quite a simple one, luckily! > > I'm assuming when you say RRC you mean the MicroHAM RemoteRig Control system > - I've helped set these up and test them for a couple of years now, so > assuming I've got that bit right... > > It simply means that it's unable to talk to the other end (ie the kit you > haven't connected at the far end). > > The MicroHAM RRC systems use SIP over UDP on three different ports - one for > voice data, one for CAT data, and one for control signals between the remote > head and the unit body. If it's a SIP connection error you're seeing, it's > because the two ends of the RRC system can't see each other (which, as you > say, is the correct case because you haven't hooked up the remote unit yet). > > If I'm barking up the wrong tree, please correct me. > > 73, and a firm left handshake, > John (XLX) > > -----Original Message----- > From: Elecraft [mailto:elecraft-boun...@mailman.qth.net] On Behalf Of > Jim Cary > Sent: 29 October 2016 22:27 > To: elecraft@mailman.qth.net > Subject: [Elecraft] K3 Mini Error question > > I just packed up both my control and remote systems and moved them down to my > ZF QTH, where they will be permanent. > > I have the K3 mini hooked up to the control RRC unit, but haven’t > hooked up the remote unit yet/ > > When I powered up the mini, and turned the volume control I got a three tone > warning signal. The light over the aux/mic cable is flashing yellow, which > according to the Remote Rig manual means the SIP connection has failed…. but > it isn’t clear what that means or what to do about it. I’ve checked and > doubled checked all the connections and they look good. > > Does anyone not in the CQ contest (!!!) have an idea? > > Jim > W2SM > ZF2LC > > > ______________________________________________________________ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:Elecraft@mailman.qth.net > > This list hosted by: http://www.qsl.net Please help support this email > list: http://www.qsl.net/donate.html Message delivered to > j...@eeek.org.uk > ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
