John, Thanks a lot. I suspect it will be a challenge to get them communicating over the network down here, but maybe i’ll be pleasantly surprised.
Don’t be surprised if you hear from me again though. 73, Jim > On Oct 29, 2016, at 5:47 PM, John <j...@eeek.org.uk> wrote: > > No worries Jim, glad to be of assistance. > > I've actually been testing a couple of these for a couple of years now, > helping a friend who's bought them. We've had a whole world of pain with some > bits (not RRC related, but network related) in the past, so if you have any > more issues on that front, do shout and I'll see what I can do to help. > > John (XLX) > > -----Original Message----- > From: Jim Cary [mailto:jimlc...@gmail.com] > Sent: 29 October 2016 22:45 > To: John <j...@eeek.org.uk>; Barry Baines <bbai...@mac.com> > Cc: elecraft@mailman.qth.net > Subject: Re: [Elecraft] K3 Mini Error question > > John/Barry > > Thanks for the quick responses. I’ll be setting up the other side tomorrow. > I think when I had them working at home I had both units connected before I > fired up the mini, so I didn’t have the problem. > > 73, > > Jim > > >> On Oct 29, 2016, at 5:39 PM, John <j...@eeek.org.uk> wrote: >> >> Jim, >> >> This is actually quite a simple one, luckily! >> >> I'm assuming when you say RRC you mean the MicroHAM RemoteRig Control system >> - I've helped set these up and test them for a couple of years now, so >> assuming I've got that bit right... >> >> It simply means that it's unable to talk to the other end (ie the kit you >> haven't connected at the far end). >> >> The MicroHAM RRC systems use SIP over UDP on three different ports - one for >> voice data, one for CAT data, and one for control signals between the remote >> head and the unit body. If it's a SIP connection error you're seeing, it's >> because the two ends of the RRC system can't see each other (which, as you >> say, is the correct case because you haven't hooked up the remote unit yet). >> >> If I'm barking up the wrong tree, please correct me. >> >> 73, and a firm left handshake, >> John (XLX) >> >> -----Original Message----- >> From: Elecraft [mailto:elecraft-boun...@mailman.qth.net] On Behalf Of >> Jim Cary >> Sent: 29 October 2016 22:27 >> To: elecraft@mailman.qth.net >> Subject: [Elecraft] K3 Mini Error question >> >> I just packed up both my control and remote systems and moved them down to >> my ZF QTH, where they will be permanent. >> >> I have the K3 mini hooked up to the control RRC unit, but haven’t >> hooked up the remote unit yet/ >> >> When I powered up the mini, and turned the volume control I got a three tone >> warning signal. The light over the aux/mic cable is flashing yellow, which >> according to the Remote Rig manual means the SIP connection has failed…. but >> it isn’t clear what that means or what to do about it. I’ve checked and >> doubled checked all the connections and they look good. >> >> Does anyone not in the CQ contest (!!!) have an idea? >> >> Jim >> W2SM >> ZF2LC >> >> >> ______________________________________________________________ >> Elecraft mailing list >> Home: http://mailman.qth.net/mailman/listinfo/elecraft >> Help: http://mailman.qth.net/mmfaq.htm >> Post: mailto:Elecraft@mailman.qth.net >> >> This list hosted by: http://www.qsl.net Please help support this email >> list: http://www.qsl.net/donate.html Message delivered to >> j...@eeek.org.uk >> > ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com