Is there a way to simulate different agc settings by generating sine wave CW signals and varying the relevant parameters?
I'd like to write some code to allow for straightforward observation of the phenomena we are discussing and various assumptions about the input signals to be tested. It should be possible to create "mush" and also the desired response, I would think. It would be useful to those wishing to understand the theory in a more concrete way. Matt NQ6N On Mon, Mar 6, 2017 at 3:14 PM Brian Hunt <huntin...@coastside.net> wrote: > I noticed that your AGC curves were made with the RF gain full max. I > rarely operate that way. I usually turn the RF gain down to where the noise > peaks are barely kicking the S-meter. By doing so, is it fair to say I'm > moving the curve to the right? I.e, a higher signal amplitude before the > AGC kicks in for a given THR number? > > Nice presentation Al. Thanks. > > 73, > Brian, K0DTJ > > > On Mar 5, 2017, at 21:50, Al Lorona <alor...@sbcglobal.net> wrote: > > > > I spent a little bit of time this weekend and put together yet another > K3 AGC (YAKA) "white paper" to put some measurements and discussion of the > results down in the hope that others may benefit. > > ______________________________________________________________ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:Elecraft@mailman.qth.net > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > Message delivered to m...@nq6n.com > ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
