Gernot,
When changing the synthesizers, the major concern is dropping the
lockwashers behind the existing mounting screws.
To avoid that, loosen the screws almost all the way
but not quite out of their threads. Then tilt the board toward the rear
and push the lockwashers as far onto the screws as possible.
Then completely unscrew the remaining threads.
Grasp the board (with the screws still through it) and pull straight upward.
For all the other steps of installing the options, follow the instructions.
73,
Don W3FPR
On 3/11/2017 5:57 PM, g...@gmx.net wrote:
Hello list,
I've purchased a used K3 S/N in the 3ks, and plan to apply some of the
K3S upgrade options.
Any experiences, hints or do's and don'ts to tell for me?
I'm using the K3 mainly for HF contesting, VHF with an external
transverter and some DX chasing.
tu es 73
Gernot, DF5RF
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to donw...@embarqmail.com
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com