I believe the below was the problem. >> If you were on 24 mhz you were on the 12 meter band. NO you cant dial >> down to 28.4 which is not in the 12 meter band >> >> tapping up is not taking you to Ten Meters >> for some reason you are in 12 meters still >> it has happened to me too
On 04/30/2017 10:58 AM, Don Wilhelm [via Elecraft] wrote: > Stan, > > Can you tune the VFO on other bands? If not, you likely have the VFO > locked - look for the little 'padlock' icon in the upper right corner of > the display. Hold the LOCK button to the right of VFO A knob to toggle > LOCK on and off. > > What happens when you do a Direct Frequency Enter? You must place a > decimal after the MHz digits and when you have entered 28.4 tap the > ENTER button (lower right of the number keypad). > > 73, > Don W3FPR > > On 4/30/2017 11:04 AM, KG7FYI wrote: > > >> This is very confusing, Stan. Are you saying that if you tap BAND > (up), > >> you move from 24 to 28.676 MHz and then can't dial VFO A down to 28.4? > > Yes, that is exactly what is happening. I can assure you it is not > > something I programmed into the system. I checked the config menu (BND > > MAP) and all bands are in. Somehow I may have unintentionally > programmed > > an issue into the system. I haven't programmed anything into the system > > so resetting the defaults should be no loss if all goes well. The > > curiosity is how I got into this mix in the first place. Included in > > this email is an image of the front panel that might give a clue. > > > > I have the second edition of Fred Cady's book. Point me in the right > > direction and I'll plow through it. > ______________________________________________________________ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:[hidden email] > </user/SendEmail.jtp?type=node&node=7630127&i=0> > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > Message delivered to [hidden email] > </user/SendEmail.jtp?type=node&node=7630127&i=1> > > > ------------------------------------------------------------------------ > If you reply to this email, your message will be added to the > discussion below: > http://elecraft.365791.n2.nabble.com/K3-P3-and-KAT500-tp7629969p7630127.html > > To unsubscribe from K3 P3 and KAT500, click here > <http://elecraft.365791.n2.nabble.com/template/NamlServlet.jtp?macro=unsubscribe_by_code&node=7629969&code=c3RhbmxleUBzdXJjcC5vcmd8NzYyOTk2OXwxNzg3MzA0NjYz>. > NAML > <http://elecraft.365791.n2.nabble.com/template/NamlServlet.jtp?macro=macro_viewer&id=instant_html%21nabble%3Aemail.naml&base=nabble.naml.namespaces.BasicNamespace-nabble.view.web.template.NabbleNamespace-nabble.view.web.template.NodeNamespace&breadcrumbs=notify_subscribers%21nabble%3Aemail.naml-instant_emails%21nabble%3Aemail.naml-send_instant_email%21nabble%3Aemail.naml> > > ----- Stan KG7FYI -- View this message in context: http://elecraft.365791.n2.nabble.com/K3-P3-and-KAT500-tp7629969p7630128.html Sent from the Elecraft mailing list archive at Nabble.com. ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com