The point should be that a "drop of LocTite" isn't going to fix the
problem over time.
You should not have to modify a product immediately out of the box
because of a lousy
design.
Best regards,
Tom, W1TEF
Lexington, SC
On 7/24/2017 6:22 PM, John Oppenheimer wrote:
This is the response I received from Elecraft support:
On 06/27/2017 01:34 PM, Elecraft Support wrote:
To your question, yes, we are now using a drop of Locktite Blue (not
Red) on the threads for the 2 screws that hold the round contacts in
place.
John KN5L
On 07/24/2017 10:45 AM, KENT TRIMBLE wrote:
The issue is not that the paddles don't leave the factory fully tested
and operational, but that the stand-offs (E700348) loosen after a period
of time from normal use.
As posted by several of us previously, the fix is simply to place a
small dab of Loctite Blue on the threads of the two flathead screws
(E700277) which secure the stand-offs.
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to kx2_...@swsports.org
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com